|
|
|
The Intellis® 7600 DeviceNet™ Network Monitor is an integrated network module, solenoid valve and limit switch package that connects automated valves and external devices directly to the control system reducing the I/O interfaces and wiring associated with a typical hardwired solution. Our DeviceNet‘ Network Monitors include a fully encapsulated electronics module and a clear cover for easy viewing of hi-intensity LEDs which provide Module/Network diagnostics and indicate status of all I/O. Our 7600 systems operate with quarter turn and linear actuators (including an enclosure design for use with sanitary actuators), provide for both discrete and analog local I/O, and are available in a variety of agency approved enclosures from general purpose Nema 4, 4X to Class 1, Division 1, Groups B, C & D service. |
|
|
|
Features Include:
|
- ODVA Conformance tested to Composite 14
- Fully encapsulated electronics module
- Configurable via DIP switches, explicit messaging or EDS file
- Two limit switch inputs, six discrete inputs and eight discrete outputs
- Optional 4-20mA analog I/O
- Integral low current consumption (20mA) solenoid valve
- Integral shout circuit protection
- Choice of enclosures with agency approvals for NEMA Type 4, 4X through Class I, Division 1, Groups B, C and D service
|
|
|
|
Device Type:
Generic Device 0x00
|
 |
Explicit Peer to Peer Messaging |
|
|
I/O Peer to Peer Messaging |
|
|
Configuration Consistency Value |
|
|
Faulted Node Recovery |
|
|
Master/Scanner |
|
|
Quick Connect |
Baud Rates:
125K,
250K,
500K
|
|
Bit Strobe |
 |
Polling |
|
|
Cyclic |
|
|
Change of State (COS)
|
|
|
Vendor Specific |
|
|
Safety Discrete I/O |
|
|
Hardware Switches |
|
|
EDS |
|
|
Parameter Object |
|
|
Custom Software |
|
|
|
| |