Actuators - Electric  

Actuator Control Module

 

 

Rotork's industry leading heavy duty electric actuators for multi-turn and part-turn valve and damper applications can now be fitted with the DeviceNet Actuator Control Module bringing the benefits of valve automation and serial control into a single package. Rotork IQ and IQT intelligent non-intrusive electric actuator ranges, the Q range electric, Rotork Skilmatic SI and Rotork Fluid System EH electro-hydraulic actuators all accept the control module and enable the actuator to connect to a DeviceNet highway. Full actuator functionality is retained with both open/stop/close and modulating position control actions supported by the module.

The Actuator Control Module provides details on the actuator and valve status including valve position, whether the valve is moving, the state of the local controls, the torque developed and many other parameters. Should a situation arise where the actuator trips on excessive torque due to a valve failure or is moved by hand the alarm status is reported and the fault may be attended to.

Dual control by both signals on the data highway and conventional control contacts is permitted and extra contact and analogue signals can be wired through the actuator.
 
Device Type:
Generic Device 0x00

Explicit Peer to Peer Messaging
I/O Peer to Peer Messaging
Configuration Consistency Value
Faulted Node Recovery
Master/Scanner
Quick Connect
Baud Rates:
125K, 250K, 500K
I/O Slave Messaging:
Bit Strobe
Polling
Cyclic
Change of State (COS)
CIP Safety Node:
Vendor Specific
Safety Discrete I/O
Configuration Methods:
Hardware Switches
EDS
Parameter Object
Custom Software
 



Sales Office
Brassmill Lane
Bath, BA1 3JQ
United Kingdom
See our website for additional addresses.

Phone: (44) 1225 733312
Fax: (44) 1225 333467

Email: mail@rotork.co.uk
Website: www.rotork.com