|
|
|
Thin manifold electro-pneumatic regulator for PLC control and reduced wiring. Optimum for different pressure control and fine-speed cylinder control, etc., in semiconductor and precision fields.
|
|
|
|
Features Include:
|
Analog in/output unit w. 4-channel input pressure monitor & 4-channel output pressure control Control up to 4 electro-pneumatic regulators with one slave unit Piping & wiring are centralized on the front of the unit, improving workability & saving space A DIN rail can be installed on the base & back Fluid pressures controlled w/ high precision & high- speed response. Electro-pneumatic regulator's repeatability is 0.3% F.S. & response time 0.1 s (no load)
Slim electro-pneumatic regulator: -EVT100/500
| Applicable fluid |
Cleaned air |
| Hysteresis *1 |
0.4% F.S. or less |
| Linearity *1 |
±0.5% F.S. or less |
| Power voltage |
DC24V±10% |
| Current consumption |
100 mA or less |
| Dimensions |
W14 x D75 x H75 (excluding protrusions) |
| Weight |
80g |
| Model No. |
EVT100 |
EVT500 |
| Pressure control range |
0 to 100kPa |
0 to 0.5MPa |
| Maximum flow rate (ANR) |
2L/min |
6L/min |
*1. This is the characteristics at the control pressure 10 to 100% with the working pressure EVT100: 110kPa and EVT500: 0.55MPa.
|
|
|
|
Device Type:
Generic Device 0x00
|
|
Explicit Peer to Peer Messaging |
|
I/O Peer to Peer Messaging |
|
Configuration Consistency Value |
|
Faulted Node Recovery |
|
Master/Scanner |
|
Quick Connect |
Baud Rates:
125K,
250K,
500K
|
Bit Strobe |
|
Polling |
|
Cyclic |
|
Change of State (COS)
|
|
Vendor Specific |
|
Safety Discrete I/O |
|
Hardware Switches |
|
EDS |
|
Parameter Object |
|
Custom Software |
|
|
|
|
|
|
|
Sales Office
2-250, Ouji, Komaki
Aichi, 485-8551
Japan
See our website for additional addresses.
Phone:
(81) 568 74 1303
Fax:
(81) 568 77 3410
Email:
kiki@ckd.co.jp
Website:
www.ckd.co.jp
|
|
|
|