Bray Controls Series 70

  

 

The Bray Controls Series 70 DeviceNet Actuator raises valve actuation to a new level of performance. The Series 70 is the most compact, lowest profile design of any Electric Actuator delivering comparable torque output. It is offered in both Modulating and On/Off control configurations. Operating parameters such as actuator position, travel limits, torque limits, handwheel engagement, motor temperature, and motor current can be continuously monitored. Optional features such as 4-20 mA inputs, digital inputs, and high voltage/current outputs expand the capability of the Series 70 to control and monitor non-DeviceNet products at a minimal cost.
 

Features Include:
  • Modulating Units include integrated position feedback 
  • Manual Override Handwheel with Emergency Stop 
  • Open and Closed Travel Limit Monitoring 
  • Open and Closed Torque Limit Monitoring 
  • Open and Closed Speed Control with Tailoring 
  • Adjustable Deadband 
  • Adjustable Instant Reverse Motor Delay 
  • Pushbutton Local Calibration 
  • Local or Remote Autocalibration 
  • Travel Limit Cycle Counter 
  • Maintenance Parameters 
  • Optional 4-20 mA Inputs, Digital Inputs, and High Voltage/Current Outputs 
  • Optional Local Control Box
Device Type:
Generic Device 0x00
Explicit Peer to Peer Messaging
I/O Peer to Peer Messaging
Configuration Consistency Value
Faulted Node Recovery
Master/Scanner
Quick Connect
Baud Rates:
125K, 250K, 500K
I/O Slave Messaging:
Bit Strobe
Polling
Cyclic
Change of State (COS)
CIP Safety Node:
Vendor Specific
Safety Discrete I/O
Configuration Methods:
Hardware Switches
EDS
Parameter Object
Custom Software
 


Sales Office
13333 Westland East Blvd.
Houston,  TX  77041
United States
Phone: (1) 281 894-5454
Fax: (1) 281 894-9499

Email: devicenet@bray.com
Website: www.bray.com