The ControlNet Repeater Module family consists of an adapter (1786-RPA) and repeater module. The adapter is needed to connect modules to the ControlNet Network. After the adapter is installed, up to four modules in any combination of either fiber or coax repeaters can be installed.

Features Include:

• Ability to mix media types on the same repeater
• 24V dc power supplied through connection to the adapter
• DIN-rail mountable
• 1786-RPFS - Extends the physical length of your network using short distance fiber media (up to 300 meters)
• 1786-RPFM - Extends the physical length of your network using medium distance fiber (up to 3km)
• 1786-RPCD - Extends the physical length of your coax network (up to 1km)
• 1786-RPFRL - Extends the physical length of the network using single or multimode fiber (up to 10km). Also supports ring redundancy with an output relay to indicate segment integrity
• 1786-RPFRXL - Extends the physical length of the network using multimode fiber (up to 20km). Also supports ring redundancy.
• Diagnostic status on every port
• Provides intrinsically safe option
• Outdoor cable routing option
• High-noise immunity

Network Features Supported

Device Profile Type:

None

Class of product:

Scanner
Adapter
Messaging

Redundant Configuration Available: No